From M1
1. Exit M1 at junction 28
2. Follow A38 South to junction with A610, take A610 towards Ambergate
3. At the T-junction with A6 in Ambergate, opposite 'The Hurt Arms' pub, turn left towards Belper. 
4. Approaching Belper, you will see a large red brick building (see map below) on the right hand side, this is the East Mill.
5. Turn left at the traffic lights then the first right into the car park.
6. Follow the car park round to the right and you will find NHDS allocated bays.
7. The entrance to the Mill is over the small bridge, opposite the allocated bays, and there are intercom buttons next to the door.
8. Our offices are on the fourth floor of the building - up three flights of stairs or there is also a lift available for use

From Derby
1. Follow signs for the A6 to Belper and Matlock.
2. Continue through Belper, and just after the traffic lights, on the left, there is a large red brick building, turn left at the traffic lights then the first right into the car park, and follow the instructions from * above.

Click here for Multimap